General contractor job site in Belmont, California
Licensed & A+ Rated General Contractor

GENERAL CONTRACTOR
IN BELMONT, CA

One licensed company to plan the job, pull the permits, schedule the trades and answer for the finished work, from a rotted sill to a second story.

BBB A+ Rated
License #1040732
Top 7% CA Contractors
7+ Years Experience
24+ Projects
SF Peninsula
Hiring made simple

What a Belmont general contractor does for you

A general contractor is the single point of responsibility for a construction job. You sign one agreement, and we handle the scope, the building permit, the electricians, plumbers and carpenters, and the inspections, so you are not refereeing between separate trades.

Our office sits on Marine View Ave in Belmont, and we know how hillside lots, older framing and city permit counters behave in this part of San Mateo County.

You get a written scope before work starts, a clear way to price changes, and the same process whether the job is a dry rot repair or an ADU. Ask for the free walkthrough and compare it with any other bid.

Exterior repair and remodel workBathroom remodel detail
Kitchen remodelFinished living space
Our work

Photos from the field

Browse the gallery
General contractor project photo 1
General contractor project photo 2
General contractor project photo 3
General contractor project photo 4
General contractor project photo 5
General contractor project photo 6
General contractor project photo 7
General contractor project photo 8
General contractor project photo 9
General contractor project photo 10
General contractor project photo 11
General contractor project photo 12
General contractor project photo 13
General contractor project photo 14
General contractor project photo 15
How a project runs

Four steps,
one team

Construction goes better when everyone knows what comes next. Each job follows the same four steps, so you always know where the project stands and what we need from you.

Book a walkthrough
01

Walkthrough

We visit, listen and look closely, so the scope matches what you want.

02

Plans

Drawings, finish choices and the permit application.

03

Construction

Trades scheduled in order, your home protected, the mess kept small.

04

Final inspection

The city signs off, we walk the job with you, and then we hand it over.

Where we work

Belmont and
nearby cities

Each city has its own permit habits, housing stock and access quirks. Choose yours to read what we plan for there, from HOA approvals in Foster City to hillside deliveries in Belmont.

Belmont home project

Need a general contractor in Belmont?

24+Projects Completed
Top 7%CA Contractors
Call for a free estimate(650) 315-0023

Get Your Free Estimate

A+ Rated BBB Contractor • Licensed #1040732 • 7+ Years

Belmont general contractor

Hiring a general contractor in Belmont: what you get and how to choose

The short answer

RJY Construction Inc. is a licensed general contractor (License #1040732) based on Marine View Ave in Belmont, California. We run repairs, remodels, additions and new construction as one managed project: we pull the permits, schedule the trades, supervise the work and answer to you for the result.

What does a general contractor in Belmont actually do?

A general contractor is the licensed business that takes responsibility for a construction job from the first walkthrough to the final inspection. Instead of hiring a framer, an electrician, a plumber and a painter separately and trying to line up their calendars, you sign one contract and one company coordinates all of them.

In practice that means writing the scope, pulling the building permit, ordering materials, sequencing the trades so one does not undo another's work, protecting the rest of your house while walls are open, and calling for the city inspections at the right moments. When something unexpected shows up behind a wall, which in older Belmont homes it often does, the general contractor is the person who explains it, prices it in writing and fixes it.

How do you hire a general contractor in Belmont without regrets?

Start with the license. Anyone doing structural, electrical or plumbing work in California should hold a contractor's license, and you can look the number up on the state licensing board's website before you sign anything. Ours is #1040732. Then ask for a written scope that names what is included, who pulls the permit, and how changes are priced.

  • Ask who actually supervises the site day to day, and how you reach them.
  • Get the scope in writing, with finish selections and allowances called out by name.
  • Confirm the contractor, not you, pulls the permit for permitted work.
  • Ask how a change order works before the job starts, not after a surprise.
  • Visit the company's office. Ours is at 550 Marine View Ave, Ste F, Belmont.

How much does a general contractor charge, and is it cheaper to skip one?

Most residential general contractors do not bill by the hour. They price the whole job after seeing it, and the number reflects labor, materials, the trades they bring in, permits, insurance and their own management time. That management time is the part people think they can save by acting as their own contractor. It rarely works out that way on anything with permits, because mistakes in sequencing, a failed inspection or a missed lead time cost more than the fee did.

We do not publish prices, because a repair behind a shower wall and a second-story addition have nothing in common. What we do offer is a free walkthrough and a written estimate that explains what is driving the figure, so you can compare it against other bids line by line.

What jobs does RJY Construction take on?

Home repairs including dry rot, siding, decks, windows and doors; kitchen and bathroom remodels; whole-home remodels and ADUs; and custom homes and additions. The four-step process is the same for each: a detailed walkthrough to align on what you want, plans and finish selection, construction with as little disruption as we can manage, and a final inspection before we hand the house back.

Our crews work in Belmont and across the Peninsula, from Redwood Shores and Foster City to Hillsborough, Atherton and Palo Alto. Each city has its own review habits, and the pages for each one explain what we plan for there.

Red flags when you are comparing general contractors

Be wary of a bid that is a single line with no scope, a contractor who asks you to pull the permit yourself on work that needs one, pressure to sign the same day, or a refusal to put the license number on the paperwork. A good bid is boring: it lists what is included, what is excluded and what happens if conditions differ from what anyone could see at the walkthrough.

Frequently asked questions

What does a general contractor do?+

A general contractor holds the contract for a construction job and manages all of it: permits, materials, scheduling the trades, site supervision, inspections and the final handover. You deal with one licensed company instead of many separate specialists.

Is it cheaper to use a general contractor?+

Not always on the invoice, but often in total. A contractor's management replaces your own hours of coordination and absorbs the risk of sequencing mistakes, failed inspections and rework. On small single-trade jobs you may not need one.

How much does a general contractor charge per hour?+

Residential general contractors normally price the whole project, not an hourly rate. The figure covers labor, materials, subcontractors, permits and management. Call (650) 315-0023 for a free estimate that itemizes what drives the price.

What are red flags when hiring a general contractor?+

Warning signs include no license number, a vague one-line bid, asking you to pull your own permit, no written change-order process, and pressure to commit before you have compared bids.

Is there a difference between a contractor and a general contractor?+

Yes. A specialty contractor does one trade, such as roofing or electrical. A general contractor is licensed to take on the whole project and hire and supervise those specialists under one agreement.

Do you handle building permits in Belmont and nearby cities?+

Yes. For permitted work we prepare and pull the permit with the city and schedule the inspections. Where an HOA or town design review applies, we prepare the documents those approvals ask for.

Belmont General Contractor is a service of RJY Construction Inc., 550 Marine View Ave, Ste F, Belmont, CA 94002. License #1040732. Call (650) 315-0023.

Hi Dev